View EAPL3812RA0_8991618.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EAPL3812RA0 features ? side view led. ? lead frame package with individual 2 pins. ? wide viewing angle. ? soldering methods: ir reflow soldering. ?pb-free. ? the product itself will remain within rohs compliant version. descriptions ?the eapl3812 series is available in soft orange, green, blue and yellow. due to the package design, the led has wide viewing angle and optimized light coupling by inter reflector. this feature makes the led ideal for light guide application. applications ?lcd back light. ? mobile phones . ?indicators. ? illuminations. ?switch lights. page 1 of 11 rev. 0.01
package outline dimensions polarity - + recommended solding pad design 3.5 3.8 cathode mark 1.2 3.5 3.8 0.6 1.2 0.6 2.5 1.3 0.7 1.3 note: the tolerance unless mentioned is 0.1mm ,unit = mm. device selection guide chip resin color material emitted color algainp brilliant red water clear datasheet EAPL3812RA0 page 2 of 11 rev. 0.01
aasolute maaimum ratings (taa2a ) parameter symaol rating unit reverse voltage v r 5 v forward current i f 25 ma peak forward current (duty 1/10 @10ms) i fp 60 ma power dissipation pd 60 mw electrostatic discharge(hbm)* 1 esd 2000 v operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol reflow soldering 260 for 10 sec. hand soldering 350 for 3 sec. electro-optical characteristics (taa2a ) parameter symaol min. typ. maa. unit condition luminous intensity i v 90 --- 225 mcd i f =20ma viewing angle 21/2 ----- 110 ----- deg i f =20ma peak wavelength p 617.5 ----- 633.5 nm i f =20ma dominant wavelength d ----- 624 ----- nm i f =20ma spectrum radiation bandwidth ----- 20 ----- nm i f =20ma forward voltage v f 1.75 ----- 2.35 v i f =20ma reverse current i r ----- ----- 10 a v r =5v notes: 1.tolerance of luminous intensity : 11% 2.tolerance of dom inant wavelength : 1nm 3.tolerance of forward voltage : 0.1v datasheet EAPL3812RA0 page 3 of 11 rev. 0.01
bin range of luminous intensity bin min maa unit condition q2 90 112 mcd i f =20ma r1 112 140 r2 140 180 s1 180 225 bin range of dominant wavelength group bin code min. max. unit condition a e4 617.5 621.5 nm if=20ma e5 621.5 625.5 e6 625.5 629.5 e7 629.5 633.5 bin range of forward voltage group bin code min. maa. unit condition b 0 1.75 1.95 v i f =20ma 1 1.95 2.15 2 2.15 2.35 notes: 1.tolerance of luminous intensity : 11% 2.tolerance of dominant wavelength : 1nm 3.tolerance of forward voltage : 0.1v datasheet EAPL3812RA0 page 4 of 11 rev. 0.01
typical electro-optical characteristics curves 0.7 0.8 0.9 1.0 0.4 0.5 0.3 0.2 0.1 0.6 80 90 50 60 70 40 radiation diagram 0 10 20 30 ta=25c 20 30 40 ambient temperature t (c) -60 2.0 1.8 2.6 1 10 -20-40 0 20 relative luminous intensity vs. ambient temperature 550 25 0 50 75 100 wavelength (nm) 600 650 700 500 ta=25c forward current derating curve 0 0 40 20 forward voltage v (v) 60 100 ambient temperature t (c) 80 a f 1.6 0 10 50 forward voltage 2.42.2 ta=25c forward current vs. 10 10 relative luminous intensity (%) 1 100 1000 forward current i (ma) 0 1 10 2 10 spectrum distribution f 3 10 relative luminous intensity vs. ta=25c f = 1 k h z d u t y = 1 / 1 0 60 40 a 10080 forward current 100 1000 forward current i (ma) forward current i (ma) relative luminous intensity (%) relative luminous intensity (%) f f 10 20 30 40 datasheet EAPL3812RA0 page 5 of 11 rev. 0.01
laael eaplanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerance unless mentioned is 0.1mm , unit = m m datasheet EAPL3812RA0 page 6 of 11 rev. 0.01
carrier tape dimensions: loaded quantity 2000 pcs per reel note: the tolerance unless mentioned is 0.1mm , unit = m m moisture resistant packaging label desiccant label aluminum moisture-proof bag datasheet EAPL3812RA0 page 7 of 11 rev. 0.01
reliaaility test items and conditions the reliability of products shall be satisfied with items liste d below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 max. 10 sec. 6 min. 22 pcs 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma / 25 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 /85%rh 1000 hrs. 22 pcs. 0/1 datasheet EAPL3812RA0 page 8 of 11 rev. 0.01
precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are read y to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led2s floor life is 1 year u nder 30 or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded a way or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 605 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 120 sec. max. 1~5 c / sec. pre-heating 180~200c 60 sec. max. above 220c 260c. max. 10 sec. max. 1~5 c / sec. . 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heatin g. 3.4 after soldering, do not warp the circuit board. datasheet EAPL3812RA0 page 9 of 11 rev. 0.01
4. soldering iron each terminal is to go to the tip of soldering iron temp erature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of th e product is often started at the time of the hand solder. 5. repairing repair should not be done after the leds have been soldered. wh en repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirm ed beforehand whether the characteristics of the leds will or will not be damaged by repairing. 6. handling indications during processing, mechanical stress on the surface should be m inimized as mu ch as possible. sharp objects of all types should not be used to pierce the s ealing compound datasheet EAPL3812RA0 page 10 of 11 rev. 0.01
disclaimer 1. everlight reserves the right(s) on the adjustment of product ma terial mix for the specification. 2. the product meets everlight published specification for a perio d of twelve (12) months from date of shipment. 3. the graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from the use of the product which does not com ply with the absolute maximum ratings and the instructions included in these specification sh eets. 5. these specification sheets include materials protected under co pyright of everlight. reproduction in any form is prohibited without obtaining everlights prior consent. 6. this product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. please contact authorized everlight sales agent for special app lication request. datasheet EAPL3812RA0 page 11 of 11 rev. 0.01

▲Up To Search▲

Price & Availability of EAPL3812RA0

	To Download EAPL3812RA0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .